Joyetech eGo ONE V2 XL Black 2200mAh
Joyetech eGo One V2 features advanced dual circuit protection.
Joyetech eGo ONE V2 XL is an upgraded version of eGo ONE, which presents
you with two optional modes: direct output and constant voltage output
along with advanced dual circuit protection. With the short height and small size, Joyetech eGo ONE V2 gives the strongest power. XL version with 2200mAh capacity.
Joyetech eGo ONE V2 Parameters
Size (length and diameter): 91mm x 19mm
Joyetech eGo ONE V2 Features:
1. Direct Output Mode and Constant Voltage Output Mode
2. Advanced dual circuit protection
Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE is already for use. In the same way, eGo ONE will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity Light condition
60% - 100% Stay lit
30% - 59% Slowly flashes
10% - 29% Moderately flashes
0 - 9% Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.