Joyetech eGo AIO Pro Black 2300mAh Kit
- All-In-ONE style
- Top filling
-
Improved top air inflow control
- Fashionable
-
7 changeable Indicator lights
.jpg)
Joyetech AIO Pro Tips:
It doesn't come with e-liquids. Sold separately.
Joyetech eGo AIO's coil is compatible with that of CUBIS. You can buy BF Replacement coils. We suggest you use 0.6ohm BF SS coil with eGo AIO. You can also use RBA head with eGo AIO. Please use DIY 0.6ohm coils to work with eGo AIO.
eGo AIO Pro, being all-in-one style,
attaches the innovative anti-leaking structure with 4ml e-juice
capacity. eGo AIO Pro is powered by a 2300mAh built-in battery.
It is simple and convenient to use. It is unique with several mixed colors appearance and fashionable indicator lights. Joyetech eGo AIO Pro
is designed with simplicity and efficiency.
AIO Pro Parameters
- Diameter: 22mm
- Length: 141mm
- Battery: 2300mAh
- Atomizer: 4ml
.jpg)
-
1 x eGo AIO Pro Body (including built-in battery)
-
1 x BF SS316-0.6ohm MTL Coil
-
1 x BF SS316-0.5ohm DL Coil
-
2 x Mouthpiece
-
1 x USB Cable
-
1 x Quick Start Guide
-
1 x Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

AIO Pro Operation Guide:
Power on and off: Press the fire button
for 5 times in quick succession, the button light will flash 5 times to
indicate eGo AIO Pro is ready for use. In the same way, eGo AIO will be
powered off after 5 presses.
Vaping: Press the button and inhale, release it to exhale.
Choose Your Color:
In power-off condition, long press the fire button to turn off the
indicate light or shift among the color of red, yellow, green, blue,
indigo, white or purple.
Replace Atomizer head: Unscrew the atomizer cap, the atomizer is located on the cap, just replace it with a new one.
Adjust the Air Inflow: Rotating the airflow ring clockwise or counterclockwise to adjust the air inlet.

E-juice filling: Unscrew the mouthpiece base from the atomizer cap and inject the liquid directly into the 2 side holes.
Charging: Simply
charge eGo AIO Pro by connecting it with a computer or a wall adapter
via USB cable. When it's fully charged, the button light will go out.