Home > Vape Brands > Innokin > iTaste >

Innokin iTaste VV4-M 1000mAh Silver Kit, 15w, 0.8ohm
Innokin iTaste VV4-M 1000mAh Silver Kit, 15w, 0.8ohm
Innokin iTaste VV4-M 1000mAh Silver Kit, 15w, 0.8ohm


 
Call or email Steven for any questions about this Innokin iTaste VV4-M 1000mAh Silver Kit
Your Price: $34.99
Sale Price: $33.95

Stock Status:(Out of Stock)
Availability:: Usually Ships in 24 Hours
Qty:

Description Technical Specs Extended Information
 

Innokin iTaste VV4-M 1000mAh Silver Kit, 15w, 0.8ohm


The Innokin iTaste VV4-M Silver Kit is based on the bestseller Innokin iTaste VV v3.0 It features a wider range of new functions, like an increased variable wattage that goes all the way up to 15W!

With the Innokin iTaste VV4-M 1000mAh Silver Kit, in 15w, 0.8ohm you have your watts, volts, resistance, and battery levels at the flick of the wrist. This is much better than the V3 where you had to hold down the up and down buttons, then wait for the vape counter to go away just to see your resistance. If you liked the iTaste VV 3 and used it as a primary device and want to upgrade, this iTaste VV 4 improves on most aspects of it.

It comes with a standard eGo connector, so it is compatible with 510/eGo/eGo-T/eGo-C products. It doesn't come with cartomizer or e-liquid, you should order separately. Also functions as a passthrough!

Innokin iTaste VV4-M 1000mAh Silver Kit, 15w, 0.8ohm
Details:

  • Variable Voltage: voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments
  • Variable Wattage: Wattage can be adjusted from 6.0 – 15.0 watts in .5 watt increments
  • Ohms meter, battery level, puff counter
  • Short circuit/atomizer protection (0.8ohm)
  • 10-Second Cutoff: If the button is held down for 10 seconds or longer, the iTaste VV4 will stop firing until the button is released and pressed again
  • Over-Discharge protection: The iTaste VV4-M monitors the battery voltage and will automatically turn off when the battery is discharged
  • Low battery warning: The red LED and battery bar will continue blinking when the battery capacity is lower than 3.3V
  • The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed
  • Superior battery life: The iTaste VV4-M e-cigarette features a built-in 1000 mAh polymer Li-Ion rechargeable battery
  • ON/OFF battery switch: Quickly clicking three times will power the device on or off
  • Passthrough: The iTaste VV4 is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging
  • Display information: The bright display shows resistance (ohms), voltage, wattage, battery level
  • Standby current: 50uA
  • Maximum output current: 4.0A
  • Micro-USB Charging: DC 5.0V/500mA

Steven also carries quality Eliquids for your Innokin iTaste VV4-M 1000mAh Silver Kit, in several levels of strength and popular flavors, so you can refill your cartos inexpensively.




Variable Voltage
voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
iTaste 4 Variable Voltage

Variable Wattage
Wattage can be adjusted from 6.0 – 15.0 W in .5 watts increments.

Hold the "+" button first and then holding the power button for 2nds to enter variable wattage mode. The digital screen will show the puff count first, then the last setting used(in voltage or wattage).


iTaste 4 Variable Wattage


The iTaste VV 4 also works as a pass-through device

Settings Retention

The device remembers the last voltage or wattage used when switching batteries.

Display Information
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.

Features
  • Includes:Innokin iTaste V4.0 VV/VW battery 1pc

  • Innokin iTaste USB charger 1pc

  • Manual(English)1pc

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Vape Brands > Innokin > iTaste
Vape Brands > Innokin