Blue KangerTech EMOW Kit
KangerTech Blue EMOW Starter Kit, with airflow adjustable EMOW Clearomizer.
Steven was so impressed with the price, reliability and performance of the KangerTech EMOW Kit , we started selling them!
This Electronic cigarette is recommended for heavy smokers.
KangerTech EMOW Starter Kit is the latest electronic cigarette kit from Kanger. Both the battery and cartomizer are newly designed with Stainless Steel.
Length(battery and cartomizer): 151.50mm
4 colors available: Blue, Steel, Black and Cherry Red
The EMOW kit comes with
1. New EMOW VV Battery 1300mAh. The kit can also fit Vision Spinner 2 Battery
2. New Aerotank EMOW cartomizer
3. Pyrex Glass + Stainless Material
4. Upgrade Dual Coil (Stainless Steel)
5. Upgrade Airflow Control Valve V2
6. Low Resistance
7. Huge Vapor
8. The battery bottom comes with a safe hole design
EMOW Operation Guide
1) How to turn on the battery?
The EMOW battery comes with 5-click protection: Generally, the battery is shipped in the off position. In off position, the battery will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see colorful LED blink 3 times. To turn off battery, press manual button 5 times within 2 second as well, the colorful LED will also blink 3 times! "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
Specifically, you can adjust the battery's output voltage by pressing the button 3 times in one second while the LED light will blink 3 times. 3.7V (Red light), 4.2V (Green light), 4.8V (White light)
There is a sticker on the EMOW battery for power on guidence. Please remove it before use.
2) EMOW Charging
When the battery power is low, the battery LED flashes 15 times continuously while pressing the button, pls get the battery charged immediately. To charge the battery, pls gently screw the battery into the USB charger. Plug the USB charger into the USB port of an AC-USB charger or a computer. It takes about 4 hours to fully charge the battery.
1.You should use only the dedicated USB charger for the battery.
2. Pls Fully charge the battery before using to maintain a good battery life span.
3) How to fill in e-juice?
1. Turn upside down the cartomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 1.8ml e-Liquid. Do not overfill it.
3. Carefully screw on the connector, connect it with the battery and enjoy it.
4) How to control the Airflow?
When the hole and groove are overlapped, rotate the hole from left to right to get bigger airflow which reaches the Max on the rightest side. If the hole and the groove are not overlapped, the airflow is locked and no vapor comes out.
5) How to replace the EMOW coil unit/coil head?
Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!
How to insert/remove your EMOW BDCC cartomizer from battery?
ONLY TIGHTEN FINGER-TIGHT. NEVER OVER-TIGHTEN. Hold bottom of the cartomizer when you separate it from battery. Please
do not screw the cartomizer from the top or middle of the cartomizer,
just in case the e-liquid pours out.
Steven's EMOW Tips
1. The clearomizer comes with eGo thread and the battery comes with 510/eGo thread, it can work with 510/eGo thread cartomizers.
2.No e-Liquid included. You still need order e-liquid. You can choose the replacement coil unit here. And the resistance value needs to be between 1.5ohm up to 3.3ohm.