Black Kangertech EMOW Mega Starter Kit
Black Kangertech EMOW Mega Starter Kit, with airflow adjustable EMOW Clearomizer.
Steven was so impressed with the price, reliability and performance of the
Black Kangertech EMOW Mega Starter Kit, he started selling them!KangerTech EMOW Mega Starter Kit is the latest electronic cigarette kits from KangerTech. The kit comes with a 1600mAh VV battery and 2.8ml clearomizer in 5 colors. Both the battery and clearomizer are newly designed with Stainless Material. It will bring you new vaping experience better than ever.
5 colors available: Black, Blue, Brown, Cherry Red and Steel
Kangertech EMOW Mega Starter Kit Contents:
1x EMOW Mega Rechargeable Battery 1600mAh
1x Decorative ring
1x EMOW Mega Clearomizer 2.8ml
1x Authority Card
1x U.S. Wall Adapter
1x USB cord
6x Upgrade dual coil (1pc pre-installed)
Simple packing. Customary Packing from the factory,the packing is subject to change without notice.
1) How to turn on the battery?
The EMOW Mega battery comes with 5-click protection: Generally, the battery is shipped in the off position. In off position, the battery will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see the LED blink 3 times. To turn off the battery, press the manual button 5 times within 2 second as well, the white LED will also blink 3 times! "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
2)How to adjust the output voltage?
The battery allows you to adjust voltage output from 3.2v to 4.8v by spinning the knob at the bottom. You can adjust the output voltage so easily and enjoy the whole vapor time.
When the battery power is low, the battery LED flashes 15 times continuously while pressing the button, pls get the battery charged immediately.
To charge the battery, pls gently screw the battery into the USB charger. Plug the USB charger into the USB port of an AC-USB charger or a computer. It takes about 4 hours to fully charge the battery.
1.You should use only the dedicated USB charger for the battery.
2. Pls Fully charge the battery before using to maintain a good battery life span.
4) How to fill with e-liquid?
1. Turn upside down the clearomizer, then screw off the connector.
2. Use the syringer or dropper to fill less than 1.8ml e-Liquid. Do not overfill it.
3. Carefully screw on the connector, connect it with the battery and enjoy it.
5) How to control the Airflow?
When the hole and groove are overlapped, rotate the hole from left to right to get bigger airflow which reaches the Max on the rightest side. If the hole and the groove are not overlapped, the airflow is locked and no vapor comes out.
6) How to replace the coil unit/coil head?
Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!
7)How to remove your BDCC cartomizer from battery?
Hold bottom of the cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pours out.
* The clearomizer comes with 510 thread and the battery comes with 510/eGo thread, it can work with 510/eGo thread cartomizers.
* No e-Juice e-Liquid included. You still need order e-liquids.
Steven's EMOW Tips
1. The clearomizer comes with eGo thread and the battery comes with 510/eGo thread, it can work with 510/eGo thread cartomizers.
2.No e-Liquid included. You still need order e-liquid. You can choose the replacement coil unit here.